P4 2.8狂超3.6GHz测试
分享
Processor | Athlon 64 3200+ 2.0GHz (S939) Athlon 64 3500+ 2.2GHz (90nm) Athlon 64 3500+ 2.2GHz (130nm) Athlon 64 3800+ 2.4GHz Athlon 64 4000+ 2.4GHz Athlon 64 FX-55 2.6GHz |
Pentium 4 540 3.2GHz Pentium 4 550 3.4GHz Pentium 4 560 3.6GHz Pentium 4 Extreme Edition 3.4GHz |
Pentium 4 Extreme Edition 3.46GHz | Pentium 4 520 2.8GHz |
System bus | 1GHz HyperTransport | 800MHz (200MHz quad-pumped) | 1066MHz (266MHz quad-pumped) | 800MHz (200MHz quad-pumped) |
Motherboard | Asus A8V Deluxe | Abit AA8 DuraMax | Intel D925XECV2 | Abit AG8 |
BIOS revision | 1008 beta 1 | 1.4 | CV92510A.86A.0338 | 15 |
North bridge | K8T800 Pro | 925X MCH | 925XE MCH | 915P MCH |
South bridge | VT8237 | ICH6R | ICH6R | ICH6R |
Chipset drivers | 4-in-1 v.1.11 beta (9/7/04) | INF Update 6.0.1.1002 IAA for RAID 4.5.0.6515 |
INF Update 6.0.1.1002 IAA for RAID 4.5.0.6515 |
INF Update 6.0.1.1002 IAA for RAID 4.5.0.6515 |
Memory size | 1GB (2 DIMMs) | 1GB (2 DIMMs) | 1GB (2 DIMMs) | 1GB (2 DIMMs) |
Memory type | OCZ PC3200 EL DDR SDRAM at 400MHz | OCZ PC2 5300 DDR2 SDRAM at 533MHz | OCZ PC2 5300 DDR2 SDRAM at 533MHz | OCZ PC3200 EL DDR SDRAM at 400MHz |
CAS latency | 2 | 3 | 3 | 2 |
Cycle time | 5 | 10 | 10 | 5 |
RAS to CAS delay | 2 | 3 | 3 | 2 |
RAS precharge | 2 | 3 | 3 | 2 |
Hard drive | Maxtor MaXLine III 250GB SATA 150 | WD Raptor WD360GB SATA 150 | ||
Audio | Integrated VT8237/ALC850 with 3.64 drivers | Integrated ICH6R/ALC880 with 5.10.0.5022 drivers | Integrated ICH6R/ALC880 with 5.10.0.5032 drivers | Integrated ICH6R/ALC658 |
Graphics | GeForce 6800 GT 256MB with ForceWare 66.81 drivers | |||
OS | Microsoft Windows XP Professional | |||
OS updates | Service Pack 2, DirectX 9.0c |
以上是该网站测试时的平台说明,我们将同时考察Pentium 4 520在2.8GHz和3.57GHz的性能情况。并且选择Athlon 64做了对比……<
0人已赞